SEE THE BlastGARD® DIFFERENCE

Hover over to see untreated and treated demonstration

BlastGARD®

Base Price 

$17.99

 (Per Sq Foot) Fully Installed
 

FREE OnGARD® Security Door Brace with Every ShatterGARD Installation

Please insert your windowpane dimensions and quantities in the below boxes to obtain furnished and installed pricing.

Window Measuring Instructions. Click HERE

-REMOVE
-REMOVE
Please input valid width and height
Note: To avoid the minimum fee, increase windowpanes to exceed 160 sq ft. Or, check the minimum fee checkbox to proceed with the same size.

Your don`t meet the sq footage minimum requirement. Please check the box below if you are willing to pay the min fee.

Fully Installed Grand Total
X

BlastGARD® Fragment Retention Film (FRF) Guards Against the Unthinkable

Enlisted by the US Military. Recruited by Law enforcement and Former Presidents.

For decades, terrorists and extremist groups have known that explosive devices and unprotected glass form a lethal combination. Security experts report that more than 3,000 small bombs are exploded each year in the United States, and this number is expected to increase. Statistically, up to 50 percent of the injuries sustained during an explosion are glass related in nature, and in some cases razor-sharp shards have catapulted up to 3/4 of a mile away from the initial blast zone, endangering pedestrians and inflicting collateral damage to neighboring structures.  BlastGUARD (FRS) fragment retention film defends against bomb blasts, explosions and flying glass, BlastGARD glass protection film adheres to the interior side of the window. The high strength, optically clear or tinted BlastGARD (FRS) window film acts like an invisible coat of armor, making the glass stronger and virtually impenetrable to small ballistic attacks. BlastGUARD fragment retention film is virtually undetectable to the human eye and will not alter the appearance of the windows.

In the event of a major explosion, BlastGARD (FRF) fragment retention film helps hold the razor sharp glass fragments together, preventing flying shards of glass from catapulting through the air at lightning speeds. BlastGUARD safety window film also absorbs shock waves, cushioning and dispersing the impact to the window frame, lessening collateral damage to surrounding buildings.

In addition to concerns over terrorist attacks, building owners and managers are looking for affordable solutions to protect employees of processing plants, factories, and refineries from the effects of flying glass during accidental explosions.

Whether intentional or inadvertent, blasts are devastating in terms of property destruction and risk to human life. Sadly, additional losses occur as fallen glass leave buildings unprotected from Mother Nature and opportunistic looters. BlastGARD® mitigates the effects of industrial explosions and acts of terrorism.

Prepare for Any Scenario: Install BlastGARD® Today

Originally developed as a shield against bomb blasts and industrial explosions, BlastGARD® (FRF) fragment retention film adheres directly to the interior of the windowpane, maintaining the overall integrity of the glass surface.

Our blast mitigation film is incredibly strong, yet flexible enough to absorb shockwaves, cushioning and dispersing the impact to the windowpane and frame.

  • Helps hold razor-sharp glass intact, diminishing deadly flying shards.
  • Installed globally by certified technicians with minimal disruption to your facility.
  • Affordability – offers up to 70% savings over ballistic-rated glass.
  • Limited lifetime warranty covers both materials and labor.
  • Optically clear or energy saving privacy films available.

SHATTERGARD SECURITY & SAFETY WINDOW FILMS, INC. Inc. warrants their window film products and installation are covered by this certificate only when installed by a ShatterGARD authorized installer against manufacturing defects (yellowing, delaminating, peeling, and cracking) under nominal use for a limited lifetime, as described below.

The following products are covered under this warranty: BlastGARD, BurglarGARD, and StormGARD. Said products are sold with a Non-Transferable Lifetime Limited Warranty beginning from date of purchase when installed on an interior glass surface of a commercial or residential structure.

BLASTGARD FILM ONLY: Beginning from date of purchase and when installed on the interior glass surface of a commercial or residential establishment ShatterGARD will re-film any windowpane shattered as a result of an explosion. It is the responsibility of the end user to purchase and install the new glass surface prior to reapplication. However, if the total square footage installed exceeds 5,000 square feet and any windowpane is shattered as a result of an explosion, ShatterGARD will reimburse the end user for the cost of glass replacement as well as re-film those windows at no additional charge. A police report and photo of the broken windows must accompany any warranty claim.

The provider assumes no liability for damage to the film from improper treatment or care. Further, the provider also assumes no liability for glass breakage resulting from any cause. The provider’s obligation under this agreement is limited to furnishing replacement film unless otherwise stated.

ShatterGARD is not responsible for improper and/or unrealistic performance claims by independent dealers and installers. It is the responsibility of the end user to determine whether the product is suitable for their requirements. ShatterGARD does not guarantee our film products against glass or ballistic-related injuries. It is suggested that the customer retain this certificate and the invoice relating to the installation. Proof of purchase is required to obtain warranty coverage and inquiries should be directed to SHATTERGARD SECURITY & SAFETY WINDOW FILMS, INC. This Warranty gives you specific rights, you may have others’ rights which vary from state to state.

All ShatterGARD films are thermo-pane safe and guaranteed for the lifetime of the film not to damage the windowpane seals and gaskets.

Download as PDF

ShatterGARD Window Film Products | Cleaning & Curing Explanation

Do not clean or touch window or film surfaces for 45 days

Q. How should my windows appear after installation?

A. You may see what resembles air bubbles or imperfections in the film, however in reality what you are seeing are moisture pockets that typically dissipate within 90 days. Drying times may exceed 90 days depending on the amount of direct sunlight the windowpanes receive. Leaving the heat/AC on for extended periods may accelerate curing times. Exterior window applications may take longer. Once the windows have thoroughly cured you can expect excellent clarity.

Q. How long will it take for the film to properly cure?

A.It may take up to 90 days for the film adhesive to properly cure, at which point you can expect maximum benefit.

Q. What type of cleaner should I use on my window film?

A. General rule of thumb… BLUE is BAD – GREEN is GOOD. So, any window cleaner that is blue in color and/or contains ammonia should not be used. Any cleaner that is green in color and/or contains vinegar is acceptable. Several window cleaner manufacturers produce vinegar-based cleaners that are readily available. Bottom line do not use a cleaner that contains ammonia or alcohol. Utilize soft clothes and/or lint free paper towels only. If a squeegee is utilized, please be sure it is new and constructed from soft rubber etc. Do not use abrasive cleaners.

Please note: Installing glass protection is not an exact science, to that extent, the films adhesive is prone to attracting particles such as lint, dust, fine hair etc. Our installers will do their absolute best to minimize this occurrence, however there are no guarantees expressed or implied.

Download as PDF

Testimonials

Product Demonstration