Click to Print Page
 
   
Performance Results
Solar Transmittance 77
Solar Absorptance 14
Solar Reflectance 9
Visible Light
Transmission
89
Visible Light
Absorptance
2
Visible Light
Reflectance (Exterior)
9
Visible Light
Reflectance (Interior)
9
Emmissivity 0.91
U-Value (Summer) 1.06
U-Value (Winter) 1.12
Shading Coefficient 0.94
Solar Heat
Gain Coefficient
0.83
UV Transmittance
(300-350 Nanos)%
<2
Total Solar
Energy Rejected
18
Physical and Thermal Properties
Tensile Strength
ASTM D 882 (PSI)
30,000
Elongation At Break
ASTM D 882 (%)
152
Yield Stress (5%)
ASTM D 882 (PSI)
15,750
Break Strength (lbs./in.) 201
Yield Strength (5%) (lbs./in.) 106
Tear Strength ASTM
D 1004 Graves
Tear Test (Initial)
18.5
Tensile Modulus
ASTM D 882 (PSI)
558,000
Puncture Strength
ASTM D 4830 (lbs.)
117
Peel Strength
(grams/inch of width)
3,250
Poisson's Ratio
ASTM D 882
0.40
Abrasion Resistance (%)
ASTM D 1003-92
ASTM D 1044
100 Cycles
<5
ANZI Z 97.1 Pass
CPSC CFR 1201,
Category II
Pass
GSA Security Criteria
Performance Condition
Daylight Application
(4 PSI / 28 PSI/msec)
3b
BS 6206, Class C Pass
Flame Spread Index
ASTM D 882
2
Smoke Index
ASTM D 882
31
Flash Temperature (°F)
ASTM D 1929
735
Combustion Rate NEGLIGIBLE
Melting Point (°C) 263
Self Ignition (°F)
ASTM D 1929
755
 
Notes: This test data contains results arrived at only after employing specific test procedures and standards. The included data does not constitute a recommendation for, endorsement of, or certification of the product or material tested. This data is provided for informational purposes only. ShatterGARD Safety & Security Window Films, Inc. makes no representation or warranty, expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose, that its products will conform to these test data. Extrapolation of data from the sample or samples relating to the batch or lot from which data were obtained may not correlate and should be interpreted accordingly with caution. ShatterGARD shall not be responsible for variations in quality, composition, appearance, performance, or other feature of similar subject matter produced by persons or under conditions over which ShatterGARD has no control. Performance results were generated from testing 1/8" (3mm) thick clear glass and are subject to variations within industry standards.
 
Click to Print this Page